Toyota 2012 Sienna Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 779

Toyota 2012 Sienna Скачать руководство пользователя страница 60

72

1-2. Opening, closing and locking the doors

SIENNA_U (OM45477U)

■

Power sliding doors

●

If the power sliding door outside handle is pulled while the power sliding
door is opening or closing, the door will reverse the operation direction.

●

During opening operation:
Stroking the power sliding door handle forward will reverse the direction
and start closing.
Stroking the handle backward will continue opening.
During closing operation:
Stroking the power sliding door handle backward will reverse the direc-
tion and start opening.
Stroking the handle forward will continue closing.

●

The power sliding doors can be opened/closed manually when the power
sliding door function is canceled with the main switch.

●

Vehicles without a smart key system: A buzzer sounds if you put the shift
lever out of P with the engine switch in the “ON” position and the sliding
door not completely closed.
Vehicles with a smart key system: A buzzer sounds if you put the shift
lever out of P with the “ENGINE START STOP” switch in IGNITION ON
mode and the sliding door not completely closed.

●

Vehicles with AUTO ACCESS SEAT: If the AUTO ACCESS SEAT has
not been locked in place after being stowed, the right-hand sliding door
will not close and a beep will sound twice.
For details, refer to “AUTO ACCESS SEAT OWNER’S MANUAL”.

«
...
58
59
60
61
62
...
»

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов