Toyota 2012 Sienna Скачать руководство пользователя страница 515 | Manualshive

Страница: 515 / 779

Toyota 2012 Sienna Скачать руководство пользователя страница 515

571

3-6. Using the interior lights

3

Interior features

SIENNA_U (OM45477U)

■

Adjusting the rear personal/interior lights angle

■

Illuminated entry system (if equipped)

Vehicles without a smart key system

The lights automatically turn on/off according to the engine switch position,
whether the doors are locked/ unlocked, and whether the doors are open/
closed.

Vehicles with a smart key system

The lights automatically turn on/off according to “ENGINE START STOP”
switch mode, the presence of the electronic key, whether the doors are
locked/unlocked, and whether the doors are open/closed.

■

To prevent battery discharge

If the lights remain on when a door is not fully closed and the personal/inte-
rior light main switch is in door position, the lights will go off automatically
after 30 seconds.

■

Customization that can be configured at Toyota dealer

Settings (e.g. the time elapsed before lights turn off) can be changed.
(Customizable features

→

P. 815)

NOTICE

■

Rear ceiling lights (if equipped)

Do not hang anything on the gap between the ceiling light cover and the ceil-
ing or pull the ceiling light cover strongly.
Doing so may cause damage.

Push the edge of the light lens.

«
...
513
514
515
516
517
...
»

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов