Toyota 2012 Sienna Скачать руководство пользователя страница 341 | Manualshive

Страница: 341 / 779

Toyota 2012 Sienna Скачать руководство пользователя страница 341

354

2-5. Driving information

SIENNA_U (OM45477U)

■

Tire chain installation

Observe the following precautions when installing and removing chains.

●

Install and remove tire chains in a safe location.

●

Install tire chains on the front tires only. Do not install tire chains on the
rear tires.

●

Install tire chains on front tires as tightly as possible. Retighten chains
after driving 1/4 - 1/2 mile (0.5 - 1.0 km).

●

Install tire chains following the instructions provided with the tire chains.

CAUTION

■

Driving with snow tires

Observe the following precautions to reduce the risk of accidents.
Failing to do so may result in a loss of vehicle control and cause death or
serious injury.

●

Use tires of the size specified.

●

Maintain the recommended level of air pressure.

●

Do not drive in excess of 75 mph (120 km/h), regardless of the type of
snow tires being used.

●

Use snow tires on all, not just some wheels.

«
...
339
340
341
342
343
...
»

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов