manualshive.com logo in svg

Toyota 2012 Sienna, Руководство пользователя, Страница: 227 / 779

Поделиться
Скачать
Toyota 2012 Sienna Скачать руководство пользователя страница 227

240

2-1. Driving procedures

SIENNA_U (OM45477U)

■

If the “S” indicator does not come on even after shifting the shift lever
to S

This may indicate a malfunction in the automatic transaxle system. Have the
vehicle inspected by your Toyota dealer immediately. (In this situation, the
transaxle will operate in the same manner as when the shift lever is in D.)

■

Downshift restriction warning buzzer (S mode)

To help ensure safety and driving performance, downshifting operation may
sometimes be restricted. In some circumstances, downshifting may not be
possible even when the shift lever is operated. (A buzzer will sound twice.)

■

AI-SHIFT

AI-SHIFT automatically selects the suitable gear according to driver perfor-
mance and driving conditions. 
AI-SHIFT automatically operates when the shift lever is in the D position.
(Shifting the shift lever to the S position cancels the function.)

■

Driving on a downhill

On declines, there may be case where the vehicle shifts down automatically
to obtain engine braking. As a result of the downshifting the engine speed
may increase.

CAUTION

■

When driving on slippery road surfaces

Do not accelerate or shift gears suddenly. 
Sudden changes in engine braking may cause the vehicle to spin or skid,
resulting in an accident.

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов