manualshive.com logo in svg

Toyota 2012 Sienna, Руководство пользователя, Страница: 297 / 779

Поделиться
Скачать
Toyota 2012 Sienna Скачать руководство пользователя страница 297

310

2-4. Using other driving systems

SIENNA_U (OM45477U)

CAUTION

■

Before using dynamic radar cruise control

Do not overly rely on vehicle-to-vehicle distance control.
Be aware of the set speed. If automatic deceleration/acceleration is not
appropriate, adjust the vehicle speed, as well as the distance between your
vehicle and vehicles ahead by applying the brakes, etc.

■

Caution regarding the driving assist systems

Observe the following precautions. 
Failure to do so may cause an accident resulting in death or serious injury.

●

Assisting the driver to measure following distance 
The dynamic radar cruise control is only intended to help the driver in
determining the following distance between the driver’s own vehicle and a
designated vehicle travelling ahead. It is not a mechanism that allows
careless or inattentive driving, and it is not a system that can assist the
driver in low-visibility conditions. It is still necessary for driver to pay close
attention to the vehicle’s surroundings.

●

Assist the driver to judge proper following distance 
The dynamic radar cruise control determines whether the following dis-
tance between the driver’s own vehicle and a designated vehicle travelling
ahead is appropriate or not. It is not capable of making any other type of
judgement. Therefore, it is absolutely necessary for the driver to remain
vigilant and to determine whether or not there is possibility of danger in
any given situation.

●

Assisting the driver to operate the vehicle 
The dynamic radar cruise control has no capability to prevent or avoid a
collision with a vehicle travelling ahead. Therefore, if there is ever any
danger, the driver must take immediate and direct control of the vehicle
and act appropriately in order to ensure the safety of all involved.

■

To avoid inadvertent cruise control activation

Switch the cruise control off using the “ON-OFF” button when not in use.

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов