manualshive.com logo in svg

Toyota 2012 Sienna, Руководство пользователя, Страница: 296 / 779

Поделиться
Скачать
Toyota 2012 Sienna Скачать руководство пользователя страница 296

309

2-4. Using other driving systems

2

When

 d

riving

SIENNA_U (OM45477U)

■

Certification

U.S.A.

FCC ID: HYQDNMWR005 
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

FCC WARNING 
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

Radiofrequency radiation exposure Information: 
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. 
This equipment should be installed and operated with minimum distance of
20 cm between the radiator (antenna) and your body. 
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

Canada

Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, includ-
ing interference that may cause undesired operation of the device.

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов