Toyota 2012 Sienna Скачать руководство пользователя страница 300 | Manualshive

Страница: 300 / 779

Toyota 2012 Sienna Скачать руководство пользователя страница 300

313

2-4. Using other driving systems

2

When

d

riving

SIENNA_U (OM45477U)

CAUTION

■

Handling the radar sensor

Observe the following to ensure the cruise control system can function effec-
tively:
Otherwise, the system may not function correctly and could result in an acci-
dent.

●

Keep the sensor and grille cover clean at all times.
Clean the sensor and grille cover with a soft cloth so you do not mark or
damage them.

●

Do not subject the sensor or surrounding area to a strong impact.
If the sensor moves even slightly off position, the system may malfunction.
If the sensor or surrounding area is subject to a strong impact, always
have the area inspected and adjusted by a Toyota dealer.

●

Do not disassemble the sensor.

●

Do not attach accessories or stickers to the sensor, grille cover or sur-
rounding area.

●

Do not modify or paint the sensor and grille cover.

●

Do not replace them with non-genuine parts.

«
...
298
299
300
301
302
...
»

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов