manualshive.com logo in svg

Toyota 2012 Sienna, Руководство пользователя, Страница: 564 / 779

Поделиться
Скачать
Toyota 2012 Sienna Скачать руководство пользователя страница 564

620

3-8. Other interior features

SIENNA_U (OM45477U)

■

Conditions unfavorable to correct operation

The compass may not show the correct direction in the following conditions:

●

The vehicle is stopped immediately after turning.

●

The vehicle is on an inclined surface.

●

The vehicle is in a place where the earth’s magnetic field is subject to
interference by artificial magnetic fields (underground car park/parking
lot, under a steel tower, between buildings, roof car park/parking lot, near
an intersection, near a large vehicle, etc.).

●

The vehicle has become magnetized.
(There is a magnet or metal object near the trip information display.)

●

The battery has been disconnected.

●

A door is open.

CAUTION

■

While driving the vehicle

Do not adjust the display. Be sure to adjust the display only when the vehicle
is stopped.

■

When doing the circling calibration

Be sure to secure a wide space, and watch out for people and vehicles in the
neighborhood. Do not violate any local traffic rules while performing circling
calibration.

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов