Toyota 2012 Sienna Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 779

Toyota 2012 Sienna Скачать руководство пользователя страница 120

132

1-3. Adjustable components (seats, mirrors, steering wheel)

SIENNA_U (OM45477U)

■

Pregnant women

■

People suffering illness

Obtain medical advice and wear the seat belt in the proper way. (

→

P. 128)

■

Child seat belt usage

The seat belts of your vehicle were principally designed for persons of adult
size.

●

Use a child restraint system appropriate for the child, until the child
becomes large enough to properly wear the vehicle’s seat belt. (

→

P. 189)

●

When the child becomes large enough to properly wear the vehicle’s
seat belt, follow the instructions on P. 128 regarding seat belt usage.

■

Replacing the belt after the pretensioner has been activated

If the vehicle is involved in multiple collisions, the pretensioner will activate
for the first collision, but will not activate for the second or subsequent colli-
sions.

Obtain medical advice and wear the seat
belt in the proper way. (

→

P. 128)

Women who are pregnant should position
the lap belt as low as possible over the
hips in the same manner as other occu-
pants. Extend the shoulder belt com-
pletely over the shoulder and position the
belt across the chest. Avoid belt contact
over the rounding of the abdominal area.

If the seat belt is not worn properly, not
only a pregnant woman, but also the fetus
could suffer death or serious injury as a
result of sudden braking or a collision.

«
...
118
119
120
121
122
...
»

Содержание 2012 Sienna












































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов