Town & Country Fireplaces TC54D, Инструкция по установке и эксплуатации

Страница: 13 / 44

5056.42562
1 in.
13
TC54D _111215-44
Figure 19: Securing bolt.
Figure 18: Lintel and trim.
Adjustable Lintel
The adjustable lintel assembly has two
orientations for desired finishing. A
flanged edge and a hemmed edge. The
lintel comes factory installed with the
flange edge out. If the desired edge is
different from the factory setting, use the
following steps to change the screen.
1. Remove saftey barrier screen.
2. Remove the window trim (Figure 18).
3. Loosen the securing bolts in the
upper and lower corners on each
side of the lintel and remove the lintel.
Rotate the assembly to have the
desired edge away from the fireplace
(Figure 19).
4. The lintel assembly can then be
adjusted to align flush with your
facing material by sliding in or out
approximately 1”.
5. Tighten the securing bolts (Figure 19).
6. Re-attach the window trim.
7. Reinstall safety barrier screen.
3/8 SECURING BOLT
FLANGED EDGE HEMMED EDGE
SAFETY BARRIER
SCREEN
GLASS DOOR
TRIM