Town & Country Fireplaces TC54D Скачать руководство пользователя страница 42

Страница: 42 / 44

5056.42562

DATE OF MANUFACTURE

JAN FEB MAR APR

MAY JUN JUL AUG

SEP OCT NOV DEC

2015

2016

2017

Optional components/ Éléments facultatifs:

Powervent Kit/ kit de ventilation mécanique TCVT.PVI.25, TCVT.PV7.110, TCVT.PVCV

Blower electrical rating:

115v, 60hz, 1.1 A / Normes electriques du ventilateur: 115v, 60hz, 1.1 A

This appliance equipped for altitudes 0 - 4500 ft. (0 - 1372 m) / Cet unité est conçu pour des altitudes variant entre 0 - 4500 pieds (0 - 1372 m). In Canada, also

certified for installation in a bedroom or a bedsitting room / Aussi certifié pour installation dans une chambre à coucher ou une salle de séjour. This appliance

must be installed in accordance with local codes, if any; if none, follow the current CAN/CGA-B149 (Canada), or ANSI Z223.1 (USA) Installation Codes. Installer

l’appareil selon les codes ou règlements locaux, ou, en l’absence de tels règlements, selon les codes d’installation CAN/CGA-B149 (Canada), or ANSI Z223.1

(USA) en vigeur.

MANUFACTURED (MOBILE) HOME: This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket,

permanently located, manufactured (mobile) home where not prohibited by local codes. See owners manual for details.

FABRIQUEZ (MOBILE) MAISON: Cet appareil doit être utilisé uniquement avec le type de gaz indiqué sur la plaque signalétique et peut être installé dans une

maison préfabriquée (mobile) installée à demeure si les règlements locaux le permettent. Voir la notice du propriétaire pour plus de détails. Cet appareil ne peut

être converti à d’autres gaz sauf si une trousse de conversion certifiée est utilisée.

Install in accordance with the current standard Mobile Homes,CAN/CSA Z240 MH (in CANADA), and the Manufacturer’s Home Construction and Safety

Standard, Title 24 CFR, Part 3280, or the current Standard for Fire Safety Criteria for Manufactured Home Installations, Sites, and Communities ANSI/NFPA 501A,

(in the U.S.A.). Cet appareil diot être installé conformemént aux exigences de la norme CAN/CSA Z240 MH en vigueur de l’ACNOR, Installations de gaz dans les

Constructions Mobiles.

FOR USE WITH THE GLASS AND SCREEN BARRIER CERTIFIED WITH THE APPLIANCE ONLY / POUR UTILISATION UNIQUEMENT AVEC LES PORTES IN

VERRE CERTIFIÉES AVEC L’APPAREIL

MINIMUM CLEARANCES TO COMBUSTIBLES / CLAIRANCES MINIMALES AVEC LES COMBUSTIBLE

Left and Right side are determined when facing the front of the appliance. / Les côtés droit et gauche se déterminent

en se mettant devant l’appareil et en lui faisant face.

Top, Back and Side Standoffs / Sommet, Arrière et Côté Butée

0 in./ 0 po.

(0 mm)

Sidewall to Appliance / Du mur latéral a l’appareil

4 in./ 4 po.

(102 mm)

Ceiling to Appliance / Plafond a l’appareil

24 in./ 24 po.

(610 mm)

Mantel to Appliance / Du manteau al’appareil

*9 in./ 9 po.

(229 mm)

Maximum Mantel Extension / Allongement maximum du manteau

*12 in./ 12 po.

(305 mm)

*See Installation Manual for more detail / Voyez des Directive

de l’Installation pour plus détaux.

Mantel Supports / Supports du manteau

4 in./ 4 po.

(102 mm)

Vent Pipe / Déchargez le Tuyau

1.75 in./ 1.75 po.

(45 mm)

FOR USE WITH/

NATURAL GAS/

LP GAS/

EN CASE D’EMPLOI AVEC:

DU GAZ NATUREL DU GAZ LP

Minimum supply pressure / Pression minimum d’alimentation:

5.0 in/wc / 5.0 po/c.e.

12.5 in/wc / 12.5 po/c.e.

(For the purpose of input adjustment / dans le but de régler l’alimenation)

(1.25 kPa)

(3.11 kPa)

Maximum supply pressure / Pression maximum d’alimentation:

13.9 in/wc / 13.9 po/c.e. 13.9 in/wc / 13.9 po/c.e.

(3.45 kPa)

Manifold pressure / Pression de la tuyauterie: Maximum

3.5 in/wc / 3.5 po/c.e.

10.0 in/wc / 10.0 po/c.e.

(0.95 kPa)

(2.74 kPa)

Orifice Size / Diametre de l’injectuer:

(3.57 mm)

(2.26 mm)

Input BTU/hr (kW) / Entree BTU/h (kW):

Max.: 84,000 (24.6)

Min.: 59,000 (17.2)

Min.: 66,000 (19.3)

Pacific Energy

Fireplace Products Ltd.

Duncan, British Columbia,

Canada

708

MADE IN CANADA

FABRIQUE AU CANADA

This Appliance is Equipped For Use With /

Cet Appareil est Équipé Pour Utilise Avec :

NATURAL GAS

GAZ NATUREL

Certified for / Certifié pour Canada and U.S.A.

250814

5050.720352D

1-TC54D

VENTED GAS FIREPLACE - NOT FOR USE WITH SOLID FUEL

FOYER AU GAZ À ÉVACUATION - NE PAS UTILISER AVEC DU

COMBUSTIBLE SOLIDE

ANSI Z21.50-2014 / CSA 2.22-2014 Vented Gas Fireplaces

CAN/CGA 2.17-M91 Gas-Fired Appliance For Use At High Altitudes.

WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer

to the owner’s information manual provided with this appliance. For assistance or additional information, consult a qualified

installer, service agency or the gas supplier.

AVERTISSEMENT: Une installation, un réglage, une modification, une réparation ou un entretien mal effectué peut causer

des dommages matériels ou des blessures. Voir la notice de l’utilisateur qui accompgne l’appareil. Pour de l’aide ou des

renseignements supplémentaires, consultez un installateur, un technicien agréé ou le fournisseur de gaz.

LP-GAS

LP GAZ

MODEL/

MODELE:

TC54

SERIES/

SERIE:

NOTE:

The Rating Label is located on a plate found in a slot between the left hand side lintel and the left hand

side window frame. This plate is attached to the lintel with a cable.

Rating Label

TC54D _111215-44

Содержание TC54D













































Результаты поиска

Содержание TC54D

Отзывы:

Похожие инструкции для TC54D

Бренды по названию

Популярные бренды

Town & Country Fireplaces TC54D, Инструкция по установке и эксплуатации

Результаты поиска

Содержание TC54D

Отзывы:

Похожие инструкции для TC54D

Бренды по названию

Популярные бренды