Town & Country Fireplaces TC54D, Инструкция по установке и эксплуатации

Страница: 35 / 44

5056.42562
Figure 57: Town & Country
wall switch.
PROGRAM BUTTON
Using the Remote Control Transmitter
Temperature indication Display
With the remote control transmitter in the “OFF” position, press the thermostat
and mode keys at the same time. Look at the LCD screen on the remote control
transmitter to verify that a F (Figure 59) or C (Figure 60) is visible to the right of
the room temperature display.
Turn on the Fireplace
With the fireplace OFF, press the ON/OFF key on the remote control transmitter.
The remote control transmitter display will show the active icons on the screen.
At the same time the wall switch will activate the fireplace via the IFC module. A
single “beep” from the IFC module will confirm reception of the command.
Turn off the Fireplace
With the fireplace ON, press the ON/OFF key on the remote control transmitter.
The remote control transmitter LCD display will only show the room
temperature (Figure 59) or (Figure 60). At the same time the IFC module will turn
off the fireplace. A single “beep” from the IFC module confirms reception of the
command.
Manual Bypass of the Remote Fireplace
If the batteries of the remote control transmitter are low or depleted, the
fireplace can be turned off manually using ON/OFF switch located on Town &
Country wall switch. This will bypass the remote control transmitter.
Figure 55: Wall switch -
interface side.
Figure 56: Wall switch -
battery side.
Figure 58: Proflame 2 remote
control battery
holder.
Figure 59: Proflame 2
Fahrenheit screen.
Figure 60: Proflame 2
Celcius screen.
35
TC54D _111215-44