8
❏
13. Switch on the transmitter and receiver. Check that the
aileron servo arm and aileron are centered. Mark the pushrod
where it crosses the aileron servo arm.
❏
14. Make a bend at the mark and trim off the end of the
pushrod.
❏
15. Install the pushrod on the servo arm.
Return to step 1 (page 6) and install the aileron servo in the
left wing.
Join the Wing Panels
❏
1. Glue the two plywood wing joiners together.
❏
2. Glue the 3mm wing alignment pin centered in the right
wing half.
❏
3. Without glue, check the fi t of the wing joiner in the wing
halves. Make sure both wing halves fi t together at the root
without any gaps or misalignment. Make small adjustments
to the wing joiner if needed.
