CALIBRATION
- 7 -
TOTAL CONTROL has a built-in pressure reducing valve, allowing for downstream pressure
adjustement according to system requirements.
System pressure can be adjusted between minimum 45 psi and maximum 95 psi.
Open a tap to start up the pump, close the tap and wait for pump to stop, then check the system
pressare on the pressure gauge, normally factory calibrated at 45 psi.
Flow rate gpm 15
18
20
25
30
35
Total control psi loss
4
6
7
10
14
19
PRESSURE LOSS
Max 95 psi
Min 45 psi
Max 174 psi