PLEASE READ BEFORE PROCEEDING WITH INSTALLATION
FAILURE TO READ AND CONSIDER SAFETY INSTRUCTIONS IN THIS MANUAL OR ON
TOTAL CONTROL PRES MAY RESULT IN PERSONAL INJURY OR SERIOUS DAMAGE
TO PIPING OR FIXTURES !
Hazardous pressure.
Under certain conditions, submersible pumps can develop extremely high pressure. Install a
pressure reducing valve to limit pressure to safe levels for application. Be sure well is
equipped with a pressure relief valve.
Do not allow pump, TOTAL CONTROL, piping, or any other system component containing water to
freeze. Freezing may damage system, leading to injury or flooding. Allowing TOTAL CONTROL or
system components to freeze will void warranty.
Hazardous voltage.
Can shock, burn or cause death.
Install ground and wire TOTAL CONTROL according to local code and National Electrical Code
requirements.
Depressurize the system and disconnect power supply before installing or servicing
TOTAL CONTROL.
Make sure line voltage and frequency of power supply match motor nameplate voltage and
frequency and TOTAL CONTROL voltage and frequency.
Install TOTAL CONTROL according to all plumbing, pump and well code requirements.
Pipe joint compound can cause cracking in plastic. Use only Teflon tape when sealing joints in plastic pipe or
connecting pipe to thermoplastic pumps and TOTAL CONTROL.
For threaded conduit opening - To be used with UL Listed or Recognized, liquid-tight non-metallic (plastic)
conduit fittings.
The manufacturer is not responsible or liable for damage due to improper
installation or use
.
This is the safety alert. When you see this symbol in this manual, look for one of the following
signal words and be alert to the potential for personal injury.
Warns about hazards that
will
cause serious personal injury, death or major property
damaged if ignored.
Warns about hazards that
can
cause serious personal injury, death or major property
damaged if ignored.
- 2 -
