HYDRAULIC CONNECTION TO THE SYSTEM
CONDUIT CONNECTIONS
Line voltage and pump wires to the TOTAL CONTROL should be supplied through “liquid-
tight” nonmetallic conduit fittings rated “NEMA 12” or “UL type 12” to achieve NEMA Type
12 enclosure rating.
Failure to install unit without use of liquid tight conduit voids warranty!
- 4 -
Do not over thighten water connections
, especially when installing with metal
couplings. Damage to TOTAL CONTROL may result.
Prepare all threads with Teflon tape only.
OK NO
Do not install any tee or tap between pump and TOTAL CONTROL unit.
Always install TOTAL CONTROL with flow arrows in
the vertical position.
Electronic box must be level.
Open the electronic box cover by removing
the six screws from the cover.
