Before removing the electronic box ensure that power unit is off and unit is depressurized.
5) Tighten the six screws on the cover of
the electronic box to ensure water tight
s eal.
If cover is not securely fastened,
RESET button will not operate.
WARNING: Do not turn on power until the box cover has been securely fastened.
4) Install the new electronic box and
tighten the three screws.
Do not overthighten or damage to
t hreads may result.
3) Remove the electronic box.
1) Remove the box cover and disconnect
the electrical wires.
1
3
4
5
ELECTRONIC BOX REPLACEMENT
2) Take off the box by removing the three
screws attaching the electronic box to
the unit body.
- 14 -