4-14
710CDT/720CDT
11.
Disconnect the
flexible cable
by pulling it out from the
FDD connector
.
12.
Remove
four M2x3 screws
and remove the
FDD
from the
bracket
.
Figure 4-9 Removing the FDD from the bracket
Installing the FDD
To install the FDD, follow the steps below and refer to Figures 4-10 back through 4-6.
1.
Seat the
FDD
in the
metal bracket
and secure it with
four M2x3 screws
.
2.
Insert the
flexible cable
into the
FDD cable connector
. Gently apply uniform
pressure across the cable to assure a firm connection.
3.
Re-seat the
connector
in the
lower plastic cover
and drop the drive into it.
4.
Set the
plate
in the upper plastic cover.
5.
Seat the
flexible cable connector
into the lower plastic cover.
6.
Set the
upper plastic cover
in place and while holding the plate in place, snap the
two latches closed and secure
six M2x6 screws
.
7.
Turn the computer upside down.
8.
Make sure that the LED indicator cover is facing up, insert the
FDD
into the
computer, and gently press until it locks into place.
Содержание Tecra 710CDT
