3-70
710CDT/720CDT
When you select one of these options (except for
Not used
), a subwindow
similar to the one below displays allowing you to set the parallel port mode.
The options for this setting are
ECP
(default) and
Standard Bi-Directional
.
Options
Mode
=
ECP
DMA
=
Channel 3
For most printers, the port should be set to
ECP
. With other parallel devices,
the setting should be
Standard Bi-Directional
.
(e)
Sound system
Allows you to enable or disable the sound system.
Enabled
Enables the sound system (Default).
Disabled
Disables the sound system.
When
Enabled
is selected, a subwindow similar to the one below displays to
let you set the
WSS I/O address
,
SBPro I/O address
,
Synthesizer I/O
address
,
WSS & SBPro IRQ Level
,
WSS & SBPro DMA
,
Control I/O
address
,
MPU401 IRQ Level
, and
Joystick I/O address
.
Sound System
WSS I/O Address
=
220H
SBPro I/O Address
=
220H
Synthesizer I/O Address
=
388H
WSS & SBPro IRQ Level
=
IRQ5
WSS & SBPro DMA Playback
=
Channel 1
Record
=
Channel 0
Control I/O Address
=
120H
MPU401 (MIDI I/F) IRQ Level
=
Not Used
Joystick I/O Address
=
200H
(1)
WSS I/O address
Sets the WSS I/O address from among the following settings:
534h
(Default)
, 608h, E84h, F44h
(2)
SBPro I/O address
Sets the SBPro I/O address from among the following settings:
220h
(Default)
, 240h
Содержание Tecra 710CDT
