4-52
710CDT/720CDT
Installing the FL Inverter Cable
To install the FL inverter cable and LCD cable, follow the steps below and refer to Figure
4-47.
1.
Insert the
FL Inverter cable
and replace the tape on the cable and back cover.
2.
Connect the
FL Inverter cable
to
PJ703
on the IPS board and secure the ground
wire in the top cover cable channel with
one M2.5x6 screw
.
3.
Secure the
two ground cables
to the
left hinge
with
two M2.5x6 screws
.
4.
Secure the
two ground cables
to the
right hinge
with
two M2.5x6 screws
.
5.
Install the display mask, upper cover, optional memory module, optional PC card,
and battery pack as described in Sections 4.17, 4.16, 4.15, 4.4, 4.3, and 4.2.
Содержание Tecra 710CDT
