710CDT/720CDT
3-57
3.26.3
Moving within the SETUP Menu and Changing Values
1.
Press
←
and
→
to move between the two columns. Press
↑
and
↓
to move
between items in a column.
2.
Press either the
space bar
or
BkSp
to change a value.
3.26.4
Accepting Changes and Exiting the SETUP Window
1.
Press
End
to accept any changes which may have been made.
If a changed item does not require the system to reboot, the following message
displays:
Are you sure? (Y/N)
If a changed item requires the system to reboot, the following message dis-
plays:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2.
To make other changes, press
N
, then repeat the steps above.
3.
To accept the changes, press
Y
. The system will automatically reboot.
NOTE:
You can press
Esc
to quit at any time without saving changes. Before
exiting the SETUP window, the system will ask you to confirm that you don’t
want to save your changes.
3.26.5
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1.
To show the factory preset configuration, press
Home
.
2.
To accept the default settings, press
End
and then
Y
.
NOTE:
When you execute the default settings, the following settings are not
changed:
HDD Mode
Password
Sound System: I/O Address, Interrupt Level, DMA
Write Policy
Содержание Tecra 710CDT
