4-36
710CDT/720CDT
7.
Disconnect the
backup battery cable
from
PJ140
on the
power supply board
.
8.
Remove the
rubber bar
securing the RTC and backup battery cables, and the tape
securing the batteries themselves.
Note
: Take note of the cable routing and tape placement before removing
them.
9.
Lift out the RTC and backup batteries.
Figure 4-35 Removing the RTC and backup batteries
Installing the IPS Board and RTC battery
To install the IPS board and RTC battery, follow the steps below and refer to Figures 4-34 and
4-35.
1.
Seat the
backup battery
, then carefully route the cable and connect it to
PJ140
.
2.
Seat the
RTC battery
and route the cable.
3.
Secure the batteries with
tape
and press the
rubber bar
in place to secure the
battery cables.
4.
Seat the
IPS board
.
Содержание Tecra 710CDT
