T200, T200CS
4-37
5.
Remove the
FL unit cover
and
tape
securing the reflective sheet.
6.
Lift up the
reflective sheet
covering the LCD panel (Figure 4-27).
CAUTION:
When you remove the FL, do not lift up the FL panel, which is
attached to the reflective sheet covering the FL. The FL panel is highly
sensitive to dust, so be very careful not to expose it.
7.
Lift out the
FL
(Figure 4-27).
Figure 4-27 Removing the T200CS FL
Installing the T200CS FL
To install the T200CS's FL, follow the steps below and refer to Figures 4-25 through 4-27.
1.
Place the
FL
on the
FL unit
and cover the FL using a
reflective sheet
(Figure 4-27).
2.
Secure the
reflective sheet
with
tape
.
3.
Place the
FL unit cover
and secure it with
six M2x2 flat screws
(Figure 4-26).
4.
Secure the
FL unit
with
four
M2.5x4 screws
(Figure 4-25).
5.
Install the tablet, FL inverter board, lower system board, upper system board, backup
battery, RTC battery, back cover, HDD, optional PCMCIA card, optional memory
card, and battery pack as described in sections 4.2 through 4.10, and 4.12.
Содержание T200
