MODEL : 2722
Instruction Manual
910-272200-0020-100
The exclamation point
within an equilateral
triangle is intended to
alert user to the
presence of important
operating and
maintenance (servicing)
instruction in the
literature accompanying
the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
The lighting flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert user to
the presence of uninsulated
"dangerous voltage" within
the product's enclosure
that may be of sufficient
magnitude to constitute
risk of electric shock
to persons.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER (OR BACK). NO
USER - SERVICEABLE
PARTS INSIDE. REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Specification
Frequency Range
: AM 530 - 1600 KHz
: FM 88 - 108 MHz
Power Supply
: AC 240V ~ 50Hz
Power Consumption : 65W
Speed
: 33 1/3, 45, 78 RPM
Speaker
: 3x 5 4ohm 5W x 2
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO NOT REMOVE COVER.
PILOT LAMPS SOLDERED IN PLACE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
* DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
Spare Needles are available for purchase from AWA-Telefix contact 1300 366 144.
POWER SOURCE
Unwind the AC POWER CORD (37) at the back of the unit and connect it to a power outlet. Plug
A/C cord into appropriate outlet.
RADIO OPERATION
1. Press the FUNCTION button (2/63) to set the unit to Tuner mode.
2. Press the BAND button (4/53) to select the desired tuning band (AM/FM).
3. Select the desired radio station by rotating TUNING KNOB (21).
4. Adjust the volume to the desired listening level.
ANTENNA
Antenna: for FM reception, the unit is provided with a FM WIRE ANTENNA (38) , move the wire
until the reception is clear and with no interferences. For AM reception, the unit is provided with
a directional build-in ferrite antenna. Rotate the set to find the position in which the best reception
is obtained. Do not connect the FM WIRE ANTENNA (38) to any outside antenna.
CD OPERATION
PLAYING A CD
1. Press the FUNCTION button (2/63) to set the unit to CD mode.
2. Press the EJECT button (17/41) to open the CD drawer. Insert a CD into the tray with the
label side facing up.
3. Press the EJECT button (17/41) again to close the CD drawer. The display will show CD
Load for a few seconds and playback will automatically begin.
4. To skip forwards or backwards through the tracks on a CD, press the
(11/59) or
(8/47)
buttons.
5. To fast forward or rewind through a track, press and hold the
(11) or
(8) buttons on
the control panel. Release the buttons once you reach the desired position on the track. To
use the remote to fast forward or rewind, press the
(57) or
(45) button one time.
Once the desired position is reached, press the button again to resume play.
REPEAT PLAYBACK
1. To repeat a single track, select the desired track number and press the REPEAT button (44)
once. Press the PLAY button. "Repeat one" will show on the display and the selected track
will repeat once it is finished.
2. To repeat a whole CD, press the REPEAT button (44) twice. The display will show "Repeat
All". Once the disc is finished, it will start over again from the beginning.
3. To turn off the repeat feature, press the REPEAT button (44) again. The repeat display will
disappear from the LCD.
RANDOM PLAY
1. While playing a CD, press the RANDOM button (43) on the remote control.Rand will show
on the LCD display. The unit will randomly select songs from the CD.
2. To cancel Random playback, press the RANDOM button (43) again.
PROGRAMMED PLAYBACK
1. Make sure the CD is stopped.
2. Press the PROGRAM button (20/42). " 01" will shown on the display.
3. Press the
(11/59) or
(8/47)buttons to select a desired track.
4. Press the PROGRAM button (20/42) twice to store the selected track number.
5. Repeat above steps 3 and 4 to program additional tracks into memory.
NOTE
: Maximum of 99 tracks can be programmed into memory.
PLAYING MP3 CDS
This unit will play CDs recorded in MP3 format. All the controls and functions work the same as
a regular CD. Listed below are features and instructions that are unique to playing a MP3 CD.
FOLDER/ALBUM PLAYBACK
If your MP3 CD is separated into folders, follow the steps below to access the folders.
1. While the CD is stopped, press the (19/49) or the FOLDER- (18/60) buttons to
advance forward or backwards through the folders on your disc.
2. Once the desired folder is reached, use the FORWARD SKIP(11/59) or the BACKWARD
SKIP(8/47) buttons to select the desired track.
3. Press the PLAY (14/58) to begin playback of the selected track.
CD INFORMATION
If the MP3 CD has track information stored on it, such as artist and title, the LCD will display that
information during playback of the CD.
IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS
PLEASE READ CAREFULLY THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE
APPLICABLE TO YOUR EQUIPMENT.
1. Read Instructions -
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions -
The safety and operating instructions should be retained for future
reference.
3. Heed Warnings -
All warnings on the appliance and in the operating instructions should
be adhered to.
4. Follow Instructions -
All operating and use instructions should be
followed.
5. Water and Moisture -
The appliance should not be used
near water-for example, near a bathtub,washbowl,kitcken
sink,laundry tub, in a wet basement, or near a swimming
pool and the like.
6. Carts and Stands -
The appliance should be used only with a
cart or stand that is recommended by the manufacturer.
6A.
An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart combination
to overturn.
7. Wall or Ceiling Mounting -
The appliance should be mounted to a wall or ceiling
only as recommended by the manufacturer.
8. Ventilation -
The appliance should be situated so that its location or position does
not interfere with-its proper ventilation.For example, the appliance should not be
situated on a bed, sofa, rug,or similar surface that may block the ventilation openings;
or, placed in a built-in installation, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings.
9. Heat -
The appliance should be situated away from heat sources such as radiators,heat
registers, stoves,or other appliances (including amplifiers) that produce heat.
10.Power Sources -
The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance.
11.Grounding or Polarization -
Precautions should be taken so that the grounding or
polarization means of an appliance is not impeded.
12.Power -
Cord Protection - Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or against them, paying particular
attention to cords at plugs, and the point where they exit from the appliance.
13.Cleaning -
The appliance should be cleaned only as recommended by the manufacturer.
14.
This product is designed for use with the antenna attached and should not be connected
to any other external antennas.
15.Nonuse Periods -
The power cord of the appliance should be unplugged from the
outlet when left unused for a long period of time.
16.Object and Liquid Entry -
Care should be taken so objects do not fall and liquids
are not spilled into the enclosure through openings
17.Damage Requiring Service -
The appliance should be serviced by qualified service
personnel when:
A. The power-supply cord of the plug has been damaged;or
B. Objects have fallen, or liquid has been spilled into the appliance;or
C. The appliance has been exposed to rain;or
D. The appliance does not appear to operate normally or exhibits a marked change
inperformance; or
E.The appliance has been dropped, or the enclosure damaged.
18.Servicing -
The user should not attempt to service the appliance beyond that described
in the operating instructions. All other servicing should be referred to qualified service
personnel.
20-12-07
