Toshiba Portege 7140CT, Руководство пользователя

Страница: 52 / 196

3-12 Getting Started User's Manual
Portege 7140CT User's Manual – 7140_UK.doc – ENGLISH – Printed on 20/12/99 as IM_714UK
5.
If you are using MS-DOS, set the power-up mode to boot in TSETUP and
turn off the power. Refer to Chapter 7, Setup and Password Security .
6. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Resume (Standby/Suspend) mode
If you shut down the computer in Resume (Standby/Suspend) mode data
currently in memory will be saved in memory. When you turn the power back
on you can continue where you left when you turned off the computer.
1. If you are using Windows 95, click
Start
then click
Suspend
.
2.
If you are using Windows 98, click
Start
and click
Shut Down
. From
the
Shut Down
menu select
Stand by
.
3.
If you are using MS-DOS, set the power-up mode to Resume in
TSETUP and turn off the power. Refer to Chapter 8, Setup and
Password Security .
4. Turn off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
Hibernation mode
If you shut down the computer in Hibernation mode, data currently in
memory will be saved to the hard disk. When you turn the power back on,
you can continue where you left when you turned off the computer.
Hibernation settings can be made in Power Saver Utility.
When you turn off the power in Hibernation mode, the computer takes a
moment to save current memory data to the hard disk. During this time the
Disk
indicator will light and the following window will be displayed.
The hibernation window
Do not turn off the power while the memory content is being saved.
After you turn off the computer and memory is saved to the hard disk, turn
off the power to any peripheral devices.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.