Toshiba OIS PLUS Series Скачать руководство пользователя страница 11

Страница: 11 / 131

0.2 Equipment Warning Labels.

DO NOT

attempt to install, operate, maintain, or dispose of this equipment until you have

read and understood all of the product warnings and user directions that are contained in

this instruction manual.
Shown below are examples of warning labels that may be found attached to the

equipment.

DO NOT

remove or cover any of the labels. If the labels are damaged or if

additional labels are required, contact your Toshiba representative for additional labels.
The following are examples of the warning labels that may be found on the equipment and

are there to provide useful information or to indicate an imminently hazardous situation

that may result in serious injury, severe property and equipment damage, or death if the

instructions are not followed.

Examples of labels that may be found on the equipment.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Содержание OIS PLUS Series




































































































































Результаты поиска

Содержание OIS PLUS Series

Отзывы:

Похожие инструкции для OIS PLUS Series

Бренды по названию

Популярные бренды

Toshiba OIS PLUS Series, Руководство пользователя

Результаты поиска

Содержание OIS PLUS Series

Отзывы:

Похожие инструкции для OIS PLUS Series

Бренды по названию

Популярные бренды