Toshiba OIS PLUS Series, Руководство пользователя

Страница: 80 / 131

The I/O allocation for the OIS45E PLUS is shown below:
For each slot (total of 3 for OIS45E PLUS) it describes:
The name/part number of the I/O module.
The address range of the I/O registers assigned to that module.
A description of the I/O module.
For the input module in slot 1, it shows that the 16 inputs are addressed as X01000 thru X01015.
The inputs are in the input register XW0100. The setup registers for this module (if needed) are
MW0100 thru MW0123.
For the output module in slot 2, it shows that the 12 outputs are address as Y02000 thru Y02011 The
outputs are in the output register YW0200. The setup registers for this module (if needed) are
MW0200 thru MW0223.
The module in slot 3 is a combination 2 channel analog input and 2 channel analog output module.
No discrete points are present, the analog module only produces a value in a register.
In summary, if there is any question about how the I/O modules are addressed, checked the I/O
allocation table shown above.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com