Toshiba OIS PLUS Series Скачать руководство пользователя страница 17

Страница: 17 / 131

0.6 System Integration Precautions

The following precautions are provided as general guidelines for using an OIS in an

industrial or process control system.

•

The Toshiba PLC is a general-purpose product. It is a system component and is used

in conjunction with other items of industrial equipment such as PLCs, Loop Controllers,

Adjustable Speed Drives, etc.

•

A detailed system analysis and job safety analysis should be performed by the
systems designer or systems integrator before including the OIS in any new or
existing system

. Contact Toshiba for options availability and for application-specific

system integration information if required.

•

The PLC may be used to control an adjustable speed drive connected to high voltage

sources and rotating machinery that is inherently dangerous if not operated safely.

Interlock all energy sources, hazardous locations, and guards in order to restrict the

exposure of personnel to hazards. The adjustable speed drive may start the motor

without warning. Signs at the equipment installation must be posted to this effect. A

familiarity with Auto-restart settings is a requirement when controlling adjustable speed

drives. Failure of external or ancillary components may cause intermittent system

operation, i.e., the system may start the motor without warning or may not stop on

command.

Improperly designed or improperly installed system interlocks and

permissives may render a motor unable to start or stop on command

•

Control through serial communications can fail or can also override local controls, which

can create an unsafe condition. System safety features should be employed and

designed into the integrated system in a manner such that system operation, even in the

event of system failure, will not cause harm or result in personnel injury or system

damage. Use of the built-in system protective features and interlocks of the equipment

being controlled is highly recommended (i.e., emergency-off, overload protection, etc.)

•

Never use the PLC units to perform emergency stops

. Separate switches outside

the OIS, the PLC, and the ASD should be used for emergency stops.

•

Changes or modifications to the PLC program should not be made without the approval

of the system designer or systems integrator. Minor changes or modifications could

cause the defeat of safety interlocks and permissives. Any changes or modifications

should be noted and included with the system documentation.

Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]

Содержание OIS PLUS Series




































































































































Результаты поиска

Содержание OIS PLUS Series

Отзывы:

Похожие инструкции для OIS PLUS Series

Бренды по названию

Популярные бренды

Toshiba OIS PLUS Series, Руководство пользователя

Результаты поиска

Содержание OIS PLUS Series

Отзывы:

Похожие инструкции для OIS PLUS Series

Бренды по названию

Популярные бренды