Toshiba HWS-1104H series, Краткое руководство пользователя

Страница: 38 / 64

37

1 Zone Heating with Domestic Hot Water
Equipment Required:
DPSW Settings:
All DPSW’s set in the OFF position.
DPSW 13_1 to be set depending on the type of 3 way diverting valve fitted(2 wire / spring return, 3 wire
SPST or 3 wire SPDT)
Function Code Settings:
Please check the following pages for the set-up of:

External room thermostat pg.40

Room temperature controller (HWS-AMS11-E) pg.41

Auto curve set up pg.43

Hot water anti bacteria function pg.47

Hot water boost function pg.48
Note: Care should be taken when setting FC1A if the heating emitter used for Zone 1 is under floor
heating. If FC1A is set to high there is a risk that the floor surface could be damaged.
FC No FC Description FC Range Default Setting
1A Heating
– upper temperature set point limit - Zone 1( °C)
37 ~ 55 55
1B Heating
– lower temperature set point limit - Zone 1( °C)
20 ~ 37 20
1E Hot water
– upper temperature set point limit (°C)
50 ~ 80 75
1F Hot water
– lower temperature set point limit (°C)
40 ~ 60 40
20 Heat pump start temperature
– hot water operation (TTW:°C)
20 ~ 45 38
21 Heat pump stop temperature
– hot water operation (TTW:°C)
40 ~ 50 45
22 Hot water / heating priority switching temperature (°C) -20 ~20 0
24 Hot water temperature compensation
– OAT start temperature (°C)
-20 ~ 10 0
25 Hot water set point temperature
– compensation temperature (°C)
0 ~ 15 3