Toshiba E-studio18, Руководство пользователя

Страница: 124 / 172

5 EQUIPMENT SETTINGS
122 Menu Function
Menu Function
You can make use of the menu function in the “MENU” mode.
„
Functions available in the “MENU” mode
When you press the [MENU] button on the equipment, you enter the “MENU” mode which enables you to use the
advanced copy functions, make the default settings, and execute the device functions. The table below shows the
functions and settings available in the “MENU” mode: the factory default settings are boldfaced and underlined.
This chapter describes the procedure for “DEFAUT SETTINGS” and the subsequent functions. For the details about
“ADVANCED FUNCTION” and “PAPER SETTINGS”, see the reference pages below.
Menu Functions Settings Description and Reference Pages
ADVANCED
FUNCTION DENSITY AUTO , Manual (9 steps) The density is set for the copy function.
P.68 “Adjusting the density to the copy”
ORIGINAL MODE TEXT/PHOTO , TEXT, PHOTO,
BACKGROUND ERASE
The original mode is set for the copy function.
P.69 “Adjusting the original mode to the
copy”
FINISHING NONSORT , SORT, ROTATE SORT The finishing function is set for the copy
function.
P.70 “Sorting pages in the same order as
the original”
ZOOM Manual Zoom (25 - 100 - 400%),
FIXED ZOOM
The zoom function is set for the copy function.
P.72 “Zooming in or out to the copy”
2IN1/4IN1 2IN1, 4IN1, OFF The 2IN1 or 4IN1 function is set for the copy
function.
P.73 “Copying two or four pages on each
sheet”
ID CARD ON, OFF The ID CARD function is set for the copy
function.
P.75 “Copying both sides of a card on a
sheet”
EDGE ERASE ON (4 mm - 15 mm/0.2” - 0.6”), OFF The edge erase function is set for the copy
function.
P.77 “Erasing the shadow on edges”
DUAL PAGE LEFT BINDING (8 mm - 30 mm/0.3” -
1.2”), RIGHT BINDING (8 mm - 30
mm/0.3” - 1.2”),
OFF
The dual page function is set for the copy
function.
P.78 “Copying the right and left pages of a
book separately”
IMAGE SHIFT LEFT MARGIN (4 mm - 15 mm/0.2” -
0.6”), RIGHT MARGIN (4 mm - 15
mm/0.2” - 0.6”),
OFF
The image shift function is set for the copy
function.
P.79 “Shifting the pages to the right or left”
JOB MEMORY RECALL, MEMORY The job memory is set or recalled for the copy
function.
P.81 “Storing the copy functions for
frequent use”
PAPER
SETTINGS PAPER SIZE DRAWER A3, A4 , A4-R, B4, B5, B5-R, FOLIO,
8K, 16K, 16K-R, LD, LG, LT , LT-R,
COMP, 13”LG
The paper size is set for the drawer. The
default paper size varies from region to
region:
Other than North America: A4
North America: LT
P.38 “Registering the size of paper loaded
in the drawer”
BYPASS A3, A4, A4-R, B4, B5, B5-R, A5-R,
FOLIO, 8K, 16K, 16K-R, CHO-3,
YOU-4, DL, LD, LG, LT, LT-R, COMP,
13”LG, ST-R, MONARCH, COM10,
NONSIZE
The paper size is set for the bypass tray.
P.39 “Registering the size and type of
paper loaded on the bypass tray”
PAPER TYPE PLAIN , THICK1, THICK2,
ENVELOPE, TRANSPARENCY
The paper type is set for the bypass tray.
P.39 “Registering the size and type of
paper loaded on the bypass tray”