Toshiba E-studio 477s Скачать руководство пользователя страница 61

Страница: 61 / 86

Replacing Consumables / Maintenance Units

- 61 -

Lift the toner cartridge in the direction of
the arrow, and place it on a flat surface.

Remove the toner cover and desiccant.

Insert the toner cartridge taken out in step 5
into the image drum in the direction of the
arrow.

Turn the blue lever of the toner cartridge
fully in the direction of the arrow while
pressing the top of the toner cartridge.

Place a new image drum into the printer.

Close the front cover.

Note

• The front cover cannot be closed completely if the top

cover is not closed.

Please recycle used image drums.

Memo

• If you must dispose of an image drum, put it in a plastic

bag or similar container and dispose of it in accordance
with your municipality's ordinances or guidelines.

Replace the Image Drum and Toner
Cartridge Simultaneously

Note

• The image drum (the green tube) is very delicate. Handle it

carefully.

• Do not expose the image drum to direct sunlight or very

bright interior light (approximately more than 1,500 lux).
Even under the normal interior light, do not leave it for more
than 5 minutes.

Possible to get burned.

Do not throw a used image drum and toner

cartridge in the fire. They may explode, and the

toner inside may fly off and cause getting burned.

Warning

Toner cover

Blue lever

Front cover

Содержание E-studio 477s






















































































Результаты поиска

Содержание E-studio 477s

Отзывы:

Похожие инструкции для E-studio 477s

Бренды по названию

Популярные бренды

Toshiba E-studio 477s, Руководство пользователя и руководство по устранению неисправностей

Результаты поиска

Содержание E-studio 477s

Отзывы:

Похожие инструкции для E-studio 477s

Бренды по названию

Популярные бренды