manualshive.com logo in svg

Toshiba E-studio 477s, Руководство пользователя и руководство по устранению неисправностей

"Тoshiba E-studio 477s - высокопроизводительное многофункциональное устройство с возможностью печати, копирования и сканирования. Подробные технические характеристики можно найти в руководстве пользователя, которое можно бесплатно скачать с нашего сайта. Получите информацию о спецификациях и настройках принтера прямо сейчас!"

Поделиться
Скачать
background image

2

1

3

4

5

6

7

CHECKING THE EQUIPMENT STATUS WITH TopAccess

- 53 -

Save as File

2D10, 2D12, 

2D13

Wrong Job status

Turn the power OFF and then back ON. Try it again. If the error still 
persists, contact your service representative.

2D11

Not enough memory

Wait for a while and try again. If the error still persists, turn the power OFF 
and then back ON, and make another effort.

2D14

Invalid parameter specified

If you are using a template, create it again. If the error still persists, turn 
the power OFF and then back ON, and then try again.

2D15

Exceeding maximum file capacity

Divide the file into several files, or try again in a single-page format.

2D30

Failure to create directory

Make sure that the access privilege to the storage directory is writable and 
also that the disk in the directory has enough space, and then try again. If 
more than one job is performed simultaneously, the error may occur 
because the disk temporarily runs out of space. In this case, wait for a 
while and try again. If the error still persists, turn the power OFF and then 
back ON, and make another effort.

2D31, 2D33

Failure to create file

Make sure that the access privilege to the storage directory is writable and 
also that the disk in the directory has enough space, and then try again. If 
more than one job is performed simultaneously, the error may occur 
because the disk temporarily runs out of space. In this case, wait for a 
while and try again. If the error still persists, turn the power OFF and then 
back ON, and make another effort.

2D32

Failure to delete file

Make sure that the access privilege to the storage directory is writable and 
then try the job again. If the error still persists, turn the power OFF and 
then back ON, and then make another effort.

2D40

Failure to convert image file format

This error occurs when conversion to a highly compressed PDF format 
fails. Do the scanning again. If the error still persists, Use the normal PDF 
format. When this error occurs in conversion other than to a highly 
compressed PDF format, turn the power OFF and then back ON. Then try 
to scan again. If the error still persists, contact your service representative.

2D43

Encryption error. Failure to create a file

If the error still persists after reattempting, turn the power OFF and then 
back ON. Then make another effort.

2D44

Creating a file was not allowed.

Creating an unencrypted file was not allowed. Configure the encryption 
settings and try again. To create an unencrypted file, consult the 
administrator.

2D45

Failure in making meta data

Make sure that the template setting is correct, and do the scanning again. 
If the error still persists, turn the power OFF and then back ON, and then 
try again.

2D62

Failure to connect to network destination Check 
destination path.

Make sure that the network folder is shared in your network and try 
scanning again. If the error still persists, ask your administrator to check 
whether the IP address or path of the server is correct. Also make sure 
that the server is operating properly.

2D63

Specified network path is invalid. Check 
destination path.

Make sure that you specify the correct network folder and try scanning 
again.

2D64

Log on to file server failed. Check user name and 
password.

Make sure that you specify the correct user name and password to log on 
the file server, or you specify the correct file server. Then try scanning 
again.

2D65

There are too many documents in the folder. 
Failure in creating a new document

Delete the data in the local storage folder in the equipment and try 
scanning again.

2D66

Failed to process your job. Insufficient Storage 
space.

Reduce the number of pages of the problem job and try again. Check 
whether the server or local disk has sufficient space in its capacity.

2D67

FTP service is not available

Ask your administrator whether the FTP service is configured correctly.

2D68

File Sharing service is not available

Ask your administrator whether the SMB protocol is enabled.

2D69

NetWare service is not available

Ask your administrator whether the NetWare protocol is enabled.

2DA6

Failure to delete file

Delete the files in the shared folder with Explorer, turn the power OFF and 
then back ON, and reattempt the problem job. If the error still persists, 
contact your service representative. 

2DA7

Failure to acquire resource

Turn the power OFF and then back ON. Try the problem job again. If the 
error still persists, contact your service representative.

2DC0

Job canceled

The job was canceled.

2DC1

Power failure occurred

Make sure that the power cable is connected properly and is inserted 
securely. Resend the job.

Error Code

Problem Description

Corrective Action

Содержание E-studio 477s























































































Отзывы:

Нет отзывов

Похожие инструкции для E-studio 477s

Oki C911dn Mode D'Emploi preview
C911dn
Бренд: Oki Страницы: 147
Oki C9600 Series Printing Manual preview
C9600 Series
Бренд: Oki Страницы: 12
Oki C911 DICOM Maintenance Manual preview
C911 DICOM
Бренд: Oki Страницы: 297
Oki C9000 Series Printing Manual preview
C9000 Series
Бренд: Oki Страницы: 111
Oki C9000 Series Brochure & Specs preview
C9000 Series
Бренд: Oki Страницы: 6
Oki C5510n MFP Specifications preview
C5510n MFP
Бренд: Oki Страницы: 2
Oki C6000dn Handy Reference preview
C6000dn
Бренд: Oki Страницы: 108
Oki C5800Ldn Series Guía Del Usuario preview
C5800Ldn Series
Бренд: Oki Страницы: 266
Oki C5800Ldn Series Manual Do Utilizador preview
C5800Ldn Series
Бренд: Oki Страницы: 276
Oki C9300 Series Setup Manual preview
C9300 Series
Бренд: Oki Страницы: 12
Oki C5400 Series Manuel preview
C5400 Series
Бренд: Oki Страницы: 354
Oki C5400 Series Reference preview
C5400 Series
Бренд: Oki Страницы: 78
Oki C5400 Series User Manual preview
C5400 Series
Бренд: Oki Страницы: 328
Oki C5300n Install Manual preview
C5300n
Бренд: Oki Страницы: 24
Oki C7350hdn User Manual preview
C7350hdn
Бренд: Oki Страницы: 719
Oki C7350hdn Software Installation Manual preview
C7350hdn
Бренд: Oki Страницы: 20
Oki C530dn Security Manual preview
C530dn
Бренд: Oki Страницы: 23
Oki C5100n Software Installation Manual preview
C5100n
Бренд: Oki Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды