manualshive.com logo in svg

Toshiba E-studio 477s, Руководство пользователя и руководство по устранению неисправностей

"Тoshiba E-studio 477s - высокопроизводительное многофункциональное устройство с возможностью печати, копирования и сканирования. Подробные технические характеристики можно найти в руководстве пользователя, которое можно бесплатно скачать с нашего сайта. Получите информацию о спецификациях и настройках принтера прямо сейчас!"

Поделиться
Скачать
background image

2

1

3

4

5

6

7

CHECKING THE EQUIPMENT STATUS WITH TopAccess

- 54 -

Store to USB

2E10, 2E12, 

2E13

Wrong Job status

Turn the power OFF and then back ON. Try the problem job again. If the 
error still persists, contact your service representative.

2E11

Not enough memory

Wait for a while and try again. If the error still persists, turn the power OFF 
and then back ON, and make another effort.

2E14

Invalid parameter specified

If you are using a template, create it again. If the error still persists, turn 
the power OFF and then back ON, and then try again.

2E15

Document size exceeded limit or maximum size

Divide the file into several files, or reattempt in a single-page format.

2E30

Failure to create directory

Make sure that the access privilege to the storage directory is writable and 
also that the disk in the directory has enough space, and then try again. If 
more than one job is performed simultaneously, the error may occur 
because the disk temporarily runs out of space. In this case, wait for a 
while and try again. If the error still persists, turn the power OFF and then 
back ON, and make another effort.

2E31, 2E33

Failure to create file

Make sure that the access privilege to the storage directory is writable and 
also that the disk in the directory has enough space, and then try again. If 
more than one job is performed simultaneously, the error may occur 
because the disk temporarily runs out of space. In this case, wait for a 
while and try again. If the error still persists, turn the power OFF and then 
back ON, and make another effort.

2E32

Failure to delete file

Turn the power OFF and then back ON. Try the problem job again. If the 
error still persists, contact your service representative.

2E40

Failure to convert image file format

This error occurs when conversion to a highly compressed PDF format 
fails. Do the scanning again. If the error still persists, Use the normal PDF 
format. When this error occurs in conversion other than to a highly 
compressed PDF format, turn the power OFF and then back ON. Then try 
to scan again. If the error still persists, contact your service representative.

2E43

Encryption error Failure to create a file

If the error still persists after reattempting, turn the power OFF and then 
back ON. Then make another effort.

2E44

Creating a file was not allowed

Creating an unencrypted file was not allowed. Configure the encryption 
settings and try again. To create an unencrypted file, consult the 
administrator.

2E45

Failure in making meta data

Make sure that the template setting is correct, and do the scanning again. 
If the error still persists, turn the power OFF and then back ON, and then 
try again.

2E65

There are too many documents in the folder. 
Failure in creating a new document

Delete the data in the local storage folder in the equipment and try 
scanning again.

2E66

Failed to process your job. Insufficient Storage 
space.

Reduce the number of pages of the problem job and try again. Check 
whether the server or local disk has sufficient space in its capacity.

2EC0

Job canceled

The job was canceled.

2EC1

Power failure occurred

Make sure that the power cable is connected properly and is inserted 
securely. Resend the job.

Remote Scan, WS Scan, File Downloader

2A20

Failure to acquire resource

Reattempt the problem job. If the error still persists, turn the power OFF 
and then back ON, and make another effort.

2A31

WS Scan function is not available

Check if the WS Scan function is enabled. If not, change it to “enabled”.

2A40

System fatal error

Turn the power OFF and then back ON. Try scanning again.

2A50

Job canceled.

The job was canceled.

2A51

Power failure occurred

Make sure that the power cable is connected properly and is inserted 
securely. Resend the job.

2A60

Authentication for WS Scan failed

When Fax & Scan of Windows is used with the WIA driver, check if the 
user name for the login is registered.   When the control panel or EWB of 
the equipment is used, check if the user name for the login is registered.

2A70

Insufficient permission to execute Remote Scan

Check if the user is authorized to perform this job.

2A71

Insufficient permission to execute WS Scan

Check if the user is authorized to perform this job.

Error Code

Problem Description

Corrective Action

Содержание E-studio 477s























































































Отзывы:

Нет отзывов

Похожие инструкции для E-studio 477s

DataCard CP60 Quick Install Manual preview
CP60
Бренд: DataCard Страницы: 8
Oki C910 Hardware preview
C910
Бренд: Oki Страницы: 2
Oki C910 Material Safety Data Sheet preview
C910
Бренд: Oki Страницы: 52
Oki C110 Manual Do Usuário preview
C110
Бренд: Oki Страницы: 117
Oki C110 How To Remove Jammed Paper preview
C110
Бренд: Oki Страницы: 45
Oki C110 Manual De L'Utilisateur preview
C110
Бренд: Oki Страницы: 112
Oki C110 Guías Del Usuario Manual preview
C110
Бренд: Oki Страницы: 115
Oki C110 Quick Setup preview
C110
Бренд: Oki Страницы: 2
Panasonic Workio DP-3510 Service Handbook preview
Workio DP-3510
Бренд: Panasonic Страницы: 12
Panasonic Workio DP-3510 Service Manual preview
Workio DP-3510
Бренд: Panasonic Страницы: 858
Xerox 5700 Series Manual preview
5700 Series
Бренд: Xerox Страницы: 25
idp SMART-30R User Manual preview
SMART-30R
Бренд: idp Страницы: 88
Canon PIXMA MG3120 Getting Started Manual preview
PIXMA MG3120
Бренд: Canon Страницы: 4
MIMAKI UJV500 Series Quick Start Manual preview
UJV500 Series
Бренд: MIMAKI Страницы: 2
Olivetti d-COLOR MF3800 Manual preview
d-COLOR MF3800
Бренд: Olivetti Страницы: 82
Xerox WorkCentre 6400XF Evaluator Manual preview
WorkCentre 6400XF
Бренд: Xerox Страницы: 24
Konica Minolta IC-203 User Manual preview
IC-203
Бренд: Konica Minolta Страницы: 432
Thermotron BC41M Quick Start Manual preview
BC41M
Бренд: Thermotron Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды