Toshiba E-studio 477s, Руководство пользователя и руководство по устранению неисправностей

Страница: 43 / 86

2
1
3
4
5
6
7
TROUBLESHOOTING FOR NETWORK CONNECTIONS
- 43 -

Location does not contain information about your hardware
Problem description
The path to the *.inf file selected during driver installation is too far away. In other words, there are too many characters in the
directory path.
Corrective action
Copy the directory containing the *.inf file to the local drive and resume installation.

This port is currently in use
Problem description
The driver was either opened, printing a job, or in use by another printer or application, when you attempted to delete it.
Corrective action
Make sure all print jobs have been completed before deleting a port. If there are still problems, exit all applications and try again.
Check each driver to see if another driver is using the same port. If so, first change the driver’s port setting and delete the port.

Problem with the current printer setup
Problem description
The driver was not set up properly, possibly because the installation procedure was not completed.
Corrective action
Delete the driver and either reinstall it from the software DVD-ROM or download it from this equipment.
N/W-Fax Driver General Errors

“Could not connect to the MFP device” appears
Problem description
When users are trying to access to the properties of the N/W-Fax driver, an error message “Could not connect to the MFP device”
appears.
Corrective action
Communication between the N/W-Fax driver and this equipment failed. Make sure that this equipment is operating. If not, turn its
power ON.
Connect the N/W-Fax driver with this equipment through the TopAccess. If the connection fails, reboot the computer and this
equipment.

The fax jobs are not listed on the “Logs - Transmission” screen in TopAccess
Problem description
When confirming the fax job logs on the “Logs - Transmission” screen in TopAccess, the fax jobs that are sent are not displayed.
Corrective action
If the relevant fax job is not included in the Log list, your transmission job may not have been performed. In this case, search for jobs
without the department code in the “JOB STATUS - FAX” on the touch panel. Then select the relevant fax job and press the [SEND]
button to resend it.