Toshiba E-studio 477s Скачать руководство пользователя страница 11

Страница: 11 / 86

When a Paper Jam Occurs

- 11 -

Note

• If the inner finisher is installed, be sure to remove any

output paper on it before opening the top cover.

Remove the print cartridge and place it on a
flat surface.

Cover the print cartridge with paper so that
it will not be exposed to light.

Remove the jammed paper remaining
inside of the unit.

Hold the fuser unit handle and lift the fuser
unit out of the machine.

Tilt the release levers on the fuser unit
forward, and be sure to pull out the jammed
paper forward gently.

Hold the fuser unit handle and return the
fuser unit into its original position.

Return the print cartridge into the machine
carefully.

Print cartridge

Possible to get burned.

The fuser unit is extremely hot. Do not touch it.

Caution

Fuser unit handle

Release lever

Fuser unit handle

Содержание E-studio 477s






















































































Результаты поиска

Содержание E-studio 477s

Отзывы:

Похожие инструкции для E-studio 477s

Бренды по названию

Популярные бренды

Toshiba E-studio 477s, Руководство пользователя и руководство по устранению неисправностей

Результаты поиска

Содержание E-studio 477s

Отзывы:

Похожие инструкции для E-studio 477s

Бренды по названию

Популярные бренды