Toshiba 4400 Series Скачать руководство пользователя страница 17

Страница: 17 / 138

4400 Series Installation and Operation Manual – 64527-008

3.4 Transporting

WARNING

DO NOT tilt the UPS more than 10° from upright position.

Tilting the UPS more than 10° may cause crushing, trapping or other

personal injuries.

CAUTION

DO NOT transport, move, store, or place the UPS on its side.

Excessive force applied from heavy components inside may damage

the UPS.

Avoid vibration or shock exceeding 0.5 g.

Failing to observe this precaution may cause damage to the UPS.

DO NOT allow the UPS to suffer shock or impact when unpacking.

Tools used to remove packaging materials may cause damage to the

UPS.

DO NOT install the UPS where water may fall on or enter it.

Water may cause electrical shock, personal injury or UPS failure.

DO NOT push or pull on the sides of the packaging or the

UPS to move it. Always use a crane, forklift, or pallet jack for

transporting and positioning the UPS.

Pushing/pulling on the sides of the unit to move it may result in damage

to the UPS.

Содержание 4400 Series











































































































































Результаты поиска

Содержание 4400 Series

Отзывы:

Похожие инструкции для 4400 Series

Бренды по названию

Популярные бренды

Toshiba 4400 Series, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 4400 Series

Отзывы:

Похожие инструкции для 4400 Series

Бренды по названию

Популярные бренды