TORXUN AUTOPED M10S.0028, Руководство по установке, Страница: 55 / 82

Autoped Installation Manual rev 2.0 (100722)
55
XII.6 CONFIGURATION MENU OPTIONS AND DEFINITIONS
Device Unit type Default Description
APuGO Off Off, 2°-10° Triggering angle for Push and Go (angle Push and Go)
ASES 95° 45°-95° Lock out angle:
Angle at which the swing side Door/Gate panel mounted sensor is ignored just
before open/
If Ao is changed, ASES is automatically set to Ao.
ASER 0° 0°-60° Lock out angle: angle at which push side of the Door/Gate panel sensor is
ignored just before closing.
SESClo Inactive Active Sensor mounted on swing side of Door/Gate is activated or inactivated during
closing cycle
Inactive
EMY-IN CL-SPR Configuration of the emergency terminal (break contact switch)
CL-SPR Spring close (standard application)
STOP Stops Door/Gate panel closing/opening
OPEN Opens the Door/Gate panel
CL-MOT Motor close (inverse application)
OExSTp Off Off N/A
❖ Used to set one of the activation “values” to “sequential”
mode.
❖
Sequential mode is used to hold the door open until a
second activation is received.
❖
One activation opens the Door/Gate panel, and a
second activation is needed to close the Door/Gate
panel.
OEI Opening devise
inside
OEO Opening devise
outside
KEY Key opening
devise
RADIO N/A
UNLOCK PERMAN IMPULS When the Door/Gate panel is first opened: momentarily unlocks the electric lock
PERMAN When the Door/Gate panel is first opened: Permanently unlocks the electric
lock.
EL-FB Off Off Electric lock status feedback
N.O. Open if unlocked (-); closed if locked (+)
N.C. Open if locked (+); closed if unlocked (-)
Lock AU UNLOCK UNLOCK/LOCK
❖
Sets the condition of the lock when in automatic mode.
❖
Only visible when Unlock is set to PERMAN.
LockEX LOCK UNLOCK/LOCK
❖
Sets the condition of the lock when in EXIT mode.
❖
Only visible when Unlock is set to PERMAN
LockMA UNLOCK UNLOCK/LOCK
❖
Sets the condition of the lock when in MANUAL mode.
❖
Only visible when Unlock is set to PERMAN