TORXUN AUTOPED M10S.0028, Руководство по установке, Страница: 45 / 82

Autoped Installation Manual rev 2.0 (100722)
45
STEP 2: Region Selection
o
Press the joystick in and then either left or right
(←,→) to select “Region US
(USA)
”
STEP 3: Rod
o
Select the appropriate arm assembly type:
o
STD-PH (Standard Push Arm)
o
NOTE: When using the standard push arm, use the orange wire
connectors. When using the optional Track Arm Assembly, use the
green wire connections.
o
SLI-PL (optional track arm pulling configuration) P/N: M10S.0039
o
SLI-PH (optional track arm pushing configuration) P/N: M10S.0039
o
⚠
WIN-PH, DIR-PH, DIR-PL, OHC-PH, OHC-PL will not be used!
⚠
o
Press the toggle in to select the appropriate arm type
STEP 4: dAxis
o
The D Axis is the distance from the chassis mounted to the header to the
centerline of the hinge spindle. Measure this distance on the door/gate.
o
Toggle left and right to get the correct number in inches and press the joystick in
to confirm the selection.