Page
31
1
2
3
4
5
6
STEP
25
Disassemble one FAST ATTACH™ CABLE
COUPLER (66) and assemble it to the BALL
END of the CABLE (18) using the following the
following steps:
Orientate the CABLE COUPLER vertical as
shown; and carefully remove the two BOLTS
from the sides of the CABLE COUPLER.
Remove the COUPLER HOUSING and slide it
over the BALL END of the CABLE (18) as
shown.
Pull down on SPRING, and assemble the BALL
END of the CABLE (18) into COUPLER CORE
as shown.
NOTICE: MAKE SURE TO HOLD COUPLER
ASSEMBLY VERTICAL AS SHOWN TO
PREVENT THE PINS FROM FALLING OUT
DURING ASSEMBLY. SHOULD THE PINS
FALL OUT, SIMPLY ALIGN THE ANGLED
SLOTS IN THE COUPLER CORE WITH THE
LONG SLOTS IN THE COUPLER SLIDE.
INSERT THE PINS THROUGH BOTH SETS
OF SLOTS.
Slide the COUPLER HOUSING down the
CABLE and onto the COUPLER SLIDE. Reas-
semble the two BOLTS removed from above.
SPRING
ROLLER
PIN
COUPLER
CORE
SLIDE
BOLT
HOUSING
18
66
