Page 4
GENERAL NOTES
CAUTION: More than one person is required to
assemble this unit. Do not attempt to assemble by
yourself.
Torque Fitness strongly recommends having a
qualified, authorized Torque Fitness Dealer
assemble the equipment.
Unpacking the Equipment
This product is packaged and shipped in multiple
boxes. Parts from all of the boxes are required for
various steps during the assembly process.
Carefully open each box and arrange all parts near
area where assembly is to take place.
CAUTION:
Use extreme care when cutting plastic tie
wraps and package banding. A wire cutter works
best for protecting yourself and the parts.
CAUTION:
Some of the internal boxes may contain
upholstery. Do not use a utility knife to open any
boxes or the pads may be damaged.
The hardware is packed in separate bags sorted by
step. Carefully open each bag and keep sorted.
Before starting assembly, identify each part and
hardware item as listed in the parts list. If any items
are missing, contact the dealer whom you pur-
chased the unit from or call Torque Fitness Cus-
tomer Service.
Note:
Some items listed in the parts list may already
be pre-installed on the parts.
§
Read all caution notes on each page before
beginning that step.
§
Some of the items shown in the assembly
steps may already be pre-installed.
§
Note:
Some pre-installed parts may need
to be temporarily disassembled in order to
complete a step. Follow the instructions or
damage to the unit could occur.
§
Some parts may have extra holes that you
will not use. Use only the holes depicted in
the instructions.
§
Certain parts make reference to the right
and left side of the machine. In order to
remain consistent, determine the left and
right side of the machine by sitting with your
back to the rear of the machine.
§
Provide ample space around the machine
in order to ease assembly.
§
DO NOT
fully tighten any connections until
instructed to do so. This will help ensure
that alignment of all of the parts will be
correct.
§
Insert all bolts in the direction indicated by
the illustrations. Failure to do so may result
in clearance issues and will degrade the
aesthetics of your unit.
§
Carefully follow instructions for all pivot
points. In general, primary rotating parts
have connections that should be securely
tightened, while secondary connections
need to be loosened ¼ turn
Tools Required
§
Rubber mallet or hammer
§
3/4” wrench or adjustable wrench
§
Ratchet with 9/16” socket
§
9/16” box wrench
§
4mm Allen wrench (included)
§
5mm Allen wrench (included)
§
6mm Allen wrench (included)
§
6mm Long Allen wrench (included)
§
7/16” wrench or socket
§
Wire tie cutter (cuts plastic tie wraps)
§
Scissors or utility knife (cuts hardware
bags)
§
Step stool
§
Measuring tape
Optional Equipment
Optional equipment may be available for this
equipment.
Follow the instructions in the optional equipment
instructions for the sequence step to assemble it to
the base unit.
Assembly Tips
§
In a continual effort to improve our products,
specifications are subject to change.
§
A 6-inch scale is provided at the bottom of
every assembly instruction page. The head
of the bolt should not be used when
measuring the length of the bolt as depicted
in the illustration below.
1
2
3
4
5
6
