Page
23
1
2
3
4
5
6
STEP
17
Insert two GUIDE RODS (17) into the bushings
on the BASE of the RIGHT SIDE (28)
Lubricate GUIDE RODS (17) using the GUIDE
ROD LUBE (38) provided
Slide two 2" OD WASHERS (49) and two
WEIGHT STACK CUSHIONS (39) down over
the GUIDE RODS (17)
CAREFULLY
slide fourteen WEIGHT PLATES
(64) down over the GUIDE RODS (17)
NOTICE: MAKE SURE THE FLANGE SPAC-
ERS IN THE WEIGHT PLATES FACE UP-
WARDS AND THE LABEL NOTCHES FACE
INWARDS AS SHOWN
CAREFULLY
slide the HEAD PLATE (63)
down over the GUIDE RODS (17) onto the top
of the WEIGHT PLATES (64)
NOTICE: MAKE SURE SELECTOR STOP IN
THE HEAD PLATE FACES INWARD AS
SHOWN
Slide two SHAFT COLLARS (40) down over the
GUIDE RODS (17) onto the top of the HEAD
PLATE (63)
Slide the GUIDE ROD SUPPORT (19) over the
ends of the GUIDE ROD (17)
Insert the TORQUE FORK™ (65) into the
WEIGHT PLATE (64) as shown
39
65
64
17
63
40
28
FLANGE
SPACERS
SELECTOR
STOP
FLANGE
SPACERS
LABEL
NOTCH
19
49
