Toro Z Master 4000 Series, Руководство по обслуживанию

Страница: 64 / 114

MYRIDE® Installation (continued)
g348060
Figure 46
8. With assistance, tip the seat forward and connect the seat switch.
9. Install the 4 (5/16 inch) lock nuts and carriage bolts securing the rear seat
pan to the MYRIDE platform.
10. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
Fuel Tank Replacement
Fuel Tank Removal
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop and remove the key. Engage the
parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Shut off the fuel valve.
4. Remove the RH console. Right Console Replacement (page 5–11)
5. Remove the LH console. Left Console Replacement (page 5–13)
6. Remove the seat assembly. Seat Replacement (page 5–17) MYRIDE®
Replacement (page 5–20)
7. Remove the 2 (5/16 inch) nylock nuts and carriage bolts securing the rear
tank retainer plate to the chassis. Remove the rear tank retainer plate from
the chassis.
8. Remove the retainers securing the wiring harness and the vent line to the
rear tank retainer plate.
9. Remove the spring clamp and remove the fuel line from the fuel tank fitting.
10. Remove the fuel tank vent line from the fuel tank. Plug the fuel line, fuel
outlet, and vent fitting.
11. Remove the rear tank retainer plate from the chassis.
12. Open the 4 plastic clamps securing the vent line.
13. Remove the vent line from the air filter.
14. Remove the fuel tank away from the machine.
Fuel Tank Installation
1. Install the fuel tank onto the machine.
Chassis: Service and Repairs Page 5–24 4000 Series Z MASTER® Service Manual
3442-427 Rev A