Product Overview
g027935
1
2
4
5
6
7
8
9
11
12
10
3
Figure 4
1.
Traction-control pedal
7.
Engine
2.
Height-of-cut lever
8.
Fuel-tank cap
3.
SmartPark
™
switch
9.
Rear drive wheel
4.
Steering wheel
10.
Key Choice
®
control
5.
Control panel
11.
Mower deck
6.
Operator seat
12.
Front caster wheels
Controls
Become familiar with all controls in
Figure 4
and
Figure 5
before you start the engine and operate the machine.
Figure 5
Control Panel
1.
SmartPark™ Switch
5.
Blade-control switch
(power take-off)
2.
Throttle
6.
Parking brake—On
3.
Choke
7.
Parking brake indicator
light
4.
Ignition switch
8.
Parking brake—Off
Figure 6
1.
Operating–in–Reverse
warning light
3.
Fuel-presence window
2.
Key Choice key (blue in
color)
Ignition Switch
The ignition switch has 3 positions—Off, Run and Start. The
key will turn to Start and move back to Run upon release.
Turning the key to the Off position will stop the engine;
however, always remove the key when leaving the machine
to prevent someone from accidentally starting the engine
(
Figure 5
).
Choke Control
Use the choke to start a cold engine. Pull the choke knob up
to engage it. Push down on the choke knob to disengage
it (
Figure 5
).
Throttle Control
The throttle control is variable between Fast and Slow.
Moving throttle lever forward will increase engine speed and
moving throttle lever to the rear will decrease engine speed
(
Figure 5
).
Blade-Control Switch (Power Take-off)
The blade-control switch, (PTO), engages and disengages
power to the mower blades (
Figure 5
).
Fuel-Presence Window
The fuel window located on the left-hand side of the machine,
can be used to verify the presence of gasoline in the tank
(
Figure 6
).
Height-of-Cut Lever
The height-of-cut lever allows you to lower and raise the deck
from the seated position. When you raise the lever (toward
you), the deck is raised from the ground, and when you
lower it (away from you), it lowers to the ground. Adjust the
height-of-cut only while the machine is not moving (
Figure
14
).
16
Содержание TimeCutter SW 4200
