Figure 31
1.
Bolts
3.
Nut
2.
Lock washer
4.
Storage stand
3. Remove the storage stands.
4. Use the storage stands whenever the aerator is
removed from the tractor.
17
Removing the Storage Stands
(Models SR48 and SR72)
No Parts Required
Procedure
1. Raise the aerator roller(s) 3-6 inches off ground.
Place support blocks under the roller(s).
2. Remove the bolts and nuts securing the storage
stands to each end of the aerator (Figure 32).
Figure 32
1.
Bolts
3.
Nut
2.
Lock washer
4.
Storage stand
3. Remove the storage stands.
4. Use the storage stands whenever the aerator is
removed from the tractor.
Note:
When reinstalling the storage stands, make
sure they are mounted to the inside of the roller
plates so the lower frame tube will rest on the top of
the stands.
Note:
The SR75 shipping stand is also the storage
stand and the SR54-S and the SR70-S do not have
shipping stands.
21
