Toro GreensPro 1240, Руководство по обслуживанию

Страница: 59 / 186

Installing the Hydraulic Hoses and Tubes (continued)
A. Use a wrench to tighten the swivel nut onto the fitting until you feel light
resistance with the wrench; approximately 3.39 N∙m (30 in-lb) .
B. Put a mark on the swivel nut and body of the fitting. Hold the hose/tube in
alignment with a wrench to prevent the hose/tube from turning ( Figure 15 ).
g221222
Figure 15
1. Mark nut and fitting body 3. Initial position
2. Final position 4. Extend line
Note: The markings on the nut and body of the fitting show that the
connection is correctly tightened.
C. Use a second wrench to tighten the nut to the correct Flats From Wrench
Resistance (FFWR).
GreensPro ™ 1240/1260 Page 5–13 Hydraulic System: General Information
14211SL Rev A