Toro GreensPro 1240, Руководство по обслуживанию

Страница: 136 / 186

Adjusting the Tow Bar Height
g239310
Figure 59
1. Tow bar 2. Front locknut – 12 mm 3. Rear fasteners – 10 mm
The tow bar height of the GreensPro machines can be set to 3 different heights
to suit a variety of tow vehicles (
Figure 59 ).
1. Park the machine on a clean, level surface with the transport wheels in the
raised and locked position. Shut off the engine.
2. Loosen, but do not remove the front locknut (12 mm) that secures the tow
bar to the transport frame.
3. Support the hitch end of the tow bar and remove the rear fasteners (10 mm)
that secure the tow bar to the transport frame.
4. Move the tow bar to 1 of the 3 height settings and install the rear fasteners
(10 mm).
5. Tighten the fasteners that secure the tow bar to the transport frame:
10 mm bolt = 68 to 81 N∙m (50 to 60 ft-lb)
12 mm bolt = 162 to 176 N∙m (120 to 130 ft-lb)
Chassis: Adjustments Page 7–10 GreensPro ™ 1240/1260
14211SL Rev A