Toro GreensPro 1240, Руководство по обслуживанию

Страница: 166 / 186

Steering Linkage (continued)
direction. GreensPro 1260 linkage rods have a groove cut in the rod near the
end with left-hand threads.
Note: Leave the linkage rod hex nuts loose until the rod ends have been secured
and the rod length is adjusted.
The distance from the top of the steering pivot to the underside of the chassis
top plate should be
32 mm (1.25 inches) for GreensPro 1240 machines or
25 mm (1 inch) for GreensPro 1260 machines ( Figure 81 ). Loosen set screw
and adjust if necessary.
After assembly, check the steering operation and adjust as necessary; refer to
Adjusting the Steering Linkage (page 7–5) .
g239518
Figure 81
1. Set screw 2. Steering pivot
Chassis: Service and Repairs Page 7–40 GreensPro ™ 1240/1260
14211SL Rev A