Toro GreensPro 1240, Руководство по обслуживанию

Страница: 45 / 186

Removing the Engine (continued)
CAUTION
Use a suitable lifting device to safely raise and support the machine
to get access to the components under the chassis.
2. Unlatch and lift the operator seat pan forward.
3. Remove the exhaust guard if equipped.
4. Disconnect the transmission/hydraulic pump drive collar from the rubber
drive coupling.
Note: On GreensPro 1240 machines, move the hydraulic fluid tank to get
access to the engine wiring connections and engine mounting fasteners. Do
not disconnect the hydraulic fluid lines from the hydraulic fluid tank.
5. On GreensPro 1240 machines, remove the fasteners securing the hydraulic
fluid tank to the chassis ( Figure 9 ).
g238090
Figure 9
(GreensPro 1240)
1. hydraulic fluid tank 3. Lock washer (2 each)
2. Bolt (2 each) 4. Flat washer (4 each)
6. Record the individual connections and disconnect the wire harness from
the engine:
A. Ground wire ring terminal to the blower housing.
B. Two connectors to lighting coil.
C. Two connectors to magneto ignition.
GreensPro ™ 1240/1260 Page 4–7 Engine: Service and Repairs
14211SL Rev A