Toro GrandStand TURBO FORCE 74513, Руководство оператора

Страница: 51 / 60

4. Measure at the B and C locations from a level
surface to the cutting edge of blade tips ( Figure
79 ).
g006888
Figure 79
1. Measure from a level
surface 2. Measure the blade at
points
B and C
5. The difference between measurements B and C
should be no more than 6 mm (1/4 inch).
Note:
If it is not correct, refer to Leveling the
Mower Deck from Side to Side (page 51) .
Leveling the Mower Deck from
Side to Side
1. Loosen the side nut and jam nut in the yokes
you want to adjust (
Figure 80 ).
g031518
Figure 80
1. Top bolt 4. Side nut
2. Jam nut 5. Adjust these yokes to
adjust the right side of the
mower deck.
3. Yoke 6. Adjust these yokes to
adjust the left side of the
mower deck.
2. Rotate the top bolt of the yokes to adjust the
height of the mower deck (
Figure 80 ).
Note:
Rotate the bolts clockwise to raise the
deck; rotate the bolt counterclockwise to lower it.
3. Tighten the jam nuts and side bolts.
4. Check the side-to-side height; refer to Checking
the Mower Deck Side-to-Side Height (page 50) .
Checking the Mower Deck
Front-to-Rear Pitch
1. Adjust the tire pressure in the rear tires to the
correct specifications.
2. Position 1 blade front-to-rear. Measure at A and
B locations from a level surface to the cutting
edge of the blade tips ( Figure 81 ).
Note:
The mower blade should be 6 mm (1/4
inch) lower in front at A than in the rear at B .
3. Rotate the blades and repeat for other blades.
g001041
Figure 81
1. Measure the blade at
points
A and B
2. Measure from a level
surface
4. If the front-to-rear pitch is not correct, refer to
Leveling the Mower Deck from Front to Rear
(page 51)
.
Leveling the Mower Deck from
Front to Rear
1. Loosen the jam nut and side bolt in the yokes
that you want to adjust (
Figure 82 ).
51