Toro GrandStand TURBO FORCE 74513, Руководство оператора

Страница: 45 / 60

13. Run the machine for 10 minutes and verify that
the hydraulic fluid is at the correct level.
Controls System
Maintenance
Adjusting the
Motion-Control Levers
If the motion-control levers do not align horizontally,
adjust the motion-control levers.
1. Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Push the motion-control levers down out of the
N
EUTRAL
-
LOCK
position ( Figure 68 ).
4. Check if the right motion-control lever aligns
horizontally with the left motion-control lever
(
Figure 68 ).
g009436
Figure 68
1. Left motion-control lever 3. Check the horizontal
alignment here
2. Right motion-control lever
in the Neutral-lock position 4. Right motion-control lever
Note:
To adjust the right motion-control lever
horizontally, adjust the cam.
5. Release the cushion from the rear of the
machine.
6. Loosen the nut holding the cam ( Figure 69 ).
45